New DOWSIL® Dow Corning Sylgard 184 Solar Cell Panel SILICONE Encapsulation Kit

Description

SYLGARD 184 SILICONE ELASTOMER ENCAPSULATION solar KIT
SYLGARD 184 SILICONE ELASTOMER KIT
This is one of the TOP popular methods to encapsulate solar cells/panel! It is very easy to do ( see links )!!
Product Description:
This kit contains two bottles: Sylgard 184 silicone elastomer base and Sylgard 184 silicone elastomer curing agent. You simply mix these two bottles together, wait for couple minutes,  and it will be ready to use!
Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD® 182 but with faster RT cure.
Compatibility : Ceramics, Plastics, Polyesters
Product  Resistance : Oxidation, Ozone, Thermal, UV Resistance, Water Resistance
Thermal Properties -> High Temperature Stable, Low Temperature Stable.
Two-parts:
453g Silicone Elastomer Base, 45.4g
Silicone
Elastomer Current Agent
Click
HERE if you need MORE SYLGARD
Product Features
Two part, 10:1 mix ratio.
No solvents or cure byproducts.
Repairable and has good dielectric properties.
Minimal shrinkage.
Includes both Part A and Part B
NOTE: DOWSIL SYLGARD 184 is the new name for the former Dow Corning Sylgard 184. Dow Corning
is
now fully owned by Dow Chemical Corporation and the Dow Corning name
has been eliminated from the products. All former Dow Corning products
are now identified by Dow Chemical under the DOWSIL or MOLYKOTE
trademarks.
see example HOW TO USE IT ( we did NOT make this video ) :
https://www.youtube.com/watch?v=Muwclw5oYd8&NR=1
Please check our store
See our Auctions
Solar cells
Solar Panel Kit
Cells CONNECTED by factory
A Quality cells
Blocking DIODES
Flux Pens
Tab Wire
Bus Wire
SYLGARD
CLEARANCE
Other
Track Page Views With
Auctiva’s FREE Counter